Check
How to replace rear wheel bearings on Lincoln aviator
You will need to remove the tire and wheel from your 2004 Chevrolet Astro Van. Remove the end of the axle. Remove the wheel bearing nut. Remove the wheel bearing and the wheel seal. Reverse the process to install the new wheel bearing.
Is the wheel bearing on the front or the rear ????.. There is a big difference ...
Remove the tire and wheel from your 2004 Mercedes 240. Remove the end of the axle. Remove the wheel bearing nut. Remove the wheel bearing seal and the wheel bearing.
how do rearage seating in vito travliner lwb
The front wheel bearings are a sealed bearing. You will have to remove the hub from the spindle, remove the lock ring (aka C clip), and press out the bearing. Installation is in reverse order but with a new bearing. YOU WILL NEED A SHOP PRESS TO REMOVE THE BEARING AND THE BEARING RACES.
no
i also thought my 2004, tacoma had a bad wheel bearing. It turned out that it was the wheel itself not the bearing. Try rotating the tires and see if the noise moves to the rear. I waited 30000 miles to rotate, hopefully that will help.
there are 2 wheel bearings on all wheels there is an inner and outer bearing the inner bearing being bigger that the outer bearing
Its most likely a wheel bearing.
Front wheel bearings are pressed in using a hydraulic press, no torque setting. However, the wheel hub retaining/axle nut that you need to remove and replace in order to change out the bearing needs to be torqued down to 233 ft-lb.
Can figure out how to remove rear rotor assembly to replace wheel bearing assembly on a Maxima 2004 Nissan