I own a '97 Pontiac grand am where would i find the spark plugs so i can change them?
The first 3 spark plugs to the right are easy to change,the one on the left you have to loosen up the alternater to get to.
Give it a tune up. Change the spark plugs and wires..
at the end of the plug wires in the head
i have a probleme whit my 1996 grand am i cant change the plug cause there a bar on front of it
i dont know trying to find the answer my self
one per cylinder
Jack up vehicle and change the rear plugs from underneath!
The spark plugs on a 2004 Pontiac Vibe are changed by removing the plug cover, disconnecting the spark plug wires, and taking out individual spark plugs using a deep wall socket. New plugs are then set to the proper gap and torqued into place.
You must loosen the top motor mount and tilt the engine forward.
Generally I change platinum plugs at 100K and regular plugs at 50K.
on top of the engine there is a cover sheild. remove the cover by the four bolt. the plug boots will come with it, the spark plugs are down in the holes.
The spark plug gap for a 2007 Pontiac Grand Prix is .060. Most plugs come pregapped for your vehicle but it is always a good idea to check them.
when do you change spark plugs
the sparks plugs are under the cover on top of the engine
change the spark plugs and wires and change the oil and change the oil filter and air cleaner filter and you should get better gas miles
The 1993 Pontiac Grand Prix 3.4 liter engine spark plug gap should be .028. Most spark plugs come pre-gapped from the manufacturer.
Disconnect the battery, remove the spark plug cables and the boots and remove the spark plugs. Put in the new spark plugs, replace the cables and boots, and then connect the battery.
on the top of the engine there is a plate that is held down with four bolts take off those 4 bolts and you will see that the boots are connected to the plate and the plugs are under there
To change spark plugs a person must start with a car that is off, then disconnect the batter. The person must then remove the spark plug cables, remove the spark plugs, and replace them with new spark plugs. After that, one must put the spark plug cables back in the correct order, then connect the battery.
This information should be on the fan shroud.
I would imagine 6 if its a 6 cylinder.