if its anything like my 2000 savage, you need to remove the tank to get at the bolts that hold the chrome cover in place. Once you remove the chrome head cover, you should have pretty easy access to the spark plug.
First, remove the driver's seat. There are 3 screws holding the speedometer to the tank that need to be removed as well. Disconnect the vent hose at the top of the fuel tank. Turn the gas supply valve off and disconnect the gas line. Disconnect the electrical plug at the back of the tank and remove the bolt that holds it to the frame. Remove the tank and you can now access the plugs.
To change the spark plugs on a Yamaha r6 2001 you start by removing the tank off completely. After you remove the tank, then remove the 4 hoses that is connected to the air box to remove it. Once removed, take the plastic linear out and will see the head of the motor. Lastly, just pull the spark plug wires out.
I have a 07 525 XC and I have to pull the seat and tank to get to the plug.
remove fuel tank and air box plugs are under all that
remove the plastics and gas tank.
What is the spark plug gap on a kawasaki mojave 250
my kx 250 is not getting spark
bad plug bad plug cap stator
The 1991 Suzuki 250 dirt bike spark plug gap is .019. Most spark plugs will come pre-gapped from the spark plug manufacturer.
SPARK PLUG (DR8ES) (NGK) SPARK PLUG (X24ESR-U) (DENSO)
The spark plug gap for a Suzuki RMZ 250 K6 should be set at .024 inches. A new spark plug will already be preset and should not need to be adjusted.
The correct spark plug for this model is the NGK B-7ES.
.035 gap. DPR8ea-9 spark plug
.035"
at the top of the cilinder head under the spark plug cap
Where_is_locate_spark_plug_ford_2001_van_E-250
Where_is_locate_spark_plug_ford_2001_van_E-250