Want this question answered?
on the tail light problem - unbolt the tail light from inside th truck -the hold tail light assemble will come out - it is recommended to change all the blubs your all ready there
Raise the hatch & there are 2 tail light assemble mount screws...remove screws to remove the entire assembly. Look on the back side & remove the bulb that needs to be relaced
Tail light lens, or assemble.
Open trunk, there should be a few screws that hold tail light assembly to car. Remove screws and pull tail light assemble straight back.
how to change tail light bulb on Toyota sequoia
How do you change the tail light on a 2001 toyota sequoia
Inside the trunk or hatch, remove the nuts(often 4)that are on the inside near your tail light. The whole tail light assembly can be pulled outward to change the bulb. The bulb assembly twists off. Replace bulb. Assemble in reverse order.
brake lights won't go off 1995 acura intergra
check the bulbs
Open the tail gate Remove the screws that you can now see Ne light will now pop out of the fender pins The bulb holders have a little catch and du a 45deegree turn to pull out. Bulbs pull out of the holder and push in. Reverse proceedure to re-assemble
1998 Acura MDX tail light bulb replacement: Purchase the correct replacement tail light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the tail light bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
2002 what?