Want this question answered?
Starter i located on the back of the engine - between manifold and driveshaft.
depends on the model the lag 2 and older have the bearing built into the disc so its more expensive to do as its one unit other than that its not that much in it
Tyre pressure sensors
try in fuse box by steering wheel if not remove stereo will have separate fuse with wiring at the back of stereo.
There are no differences, All the engines have F9K Stamped on the back of the block
In the engine bay, at the back, next to the MAP sensor. It is an XR25 type rather than OBD I believe.
ignition on.. using button on end of stalk scroll through to service indication.. press button at least eight times... ignition off.. ignition back on and all reset
4 parking sensors on the back
Just the same as most cars. The wiper arms appear not to bend back but they do. You need to stop them by turning off the ignition whilst they are running whilst they are vertical oin the screen. They will then hinge with a bit of force Depends which Laguna, The Laguna11 is fitted with Veleo wipers which have a long slot in them as you can only lift them away from the screen about 6 inches.
front or back? 2wd or awd? what year?
The only way to change the back breaks on a 2001 ford blazer is to call the manufacturer that built the SUV. Those breaks are tricky and hard to get off let alone put back together. You have to leave the tire on while changing the break disks. Good luck!
To change the passenger headlight on a Renault Clio, one should open the compartment and remove the rubber seal from the back. From there, the bulb holder should be removed by twisting, then a new bulb should be inserted into the holder.