The process is the same as noted in an earlier post for changing the tail/brake light on a 2004 Pilot. There are two Phillips head screws that are only accessible after opening the rear tailgate lid. Remove the two screws which will allow the removal of the entire tail-light assembly. (Note that it might take some effort as there are two retaining lugs on the outer edge of the fixture which are press fitted but wiggle and pull and they will pop loose, just be careful.) The lights are identified tail and brake. A third turn to the left and the bulb housing can be removed. Simply pull the bulb from the plug and replace with like bulb bought at any auto parts store.
The "BRAKE BULB" light means that a brake bulb is not working and may require replacing.
Change the oil.
One or both your break lights are no longer working.
Oil change and tire rotation.
just had oil change on saturday. no problems. now brake lamp light on 2000 honda accord ex
If you look at the middle brake light, you'll notice two (2) notches on the left and right of the light. (This is looking at the brake light from the outside of the car, not the inside of the hatch.) Using a flathead screwdriver, pry the two screw covers off (they are plastic just like the rest of the brake light cover). Unscrew the screws and presto, you find the back to the light.
To change the brake light bulb on a 1999 Honda Passport find the light housing located in the trunk. Find the plastic covers for the lights and remove them. Pull the bulbs out carefully and replace them.
well you change it from the outside
i dont know Does anyone know how to change the brakelight on a ridgeline
the 1989 Honda accord lxi has a brake lamp light on the dashboard, if the brake lamp light is on, this means you have a brake/tail light out or disconnected
There is not an alternator indicator light on a Honda Pilot. If the alternator goes out, the battery will not stay charged.
How do you reset service light in 2003honda pilot