There are three bulbs and you'll probably want to change all three.
1. Use a flat screwdriver or old spoon to level the bottom of the fascia. The clip at the front is quite long.
2. The cover is held by two more clips on either side of the multifunction display. So grasp the cover on either side and pull backwards.
3. Display is held by two torx 20 bolts. Be careful not to drop the bolts.
4. Bulbs are held by twist connectors. Twist to remove.
Clean the bulbs before you insert them.
it is behind the display in the centre see previous questions on how to change display bulbs, in oreder to be able to change the bulb.
There is no bulb. it is an LCD display soldered to a circuit board. If it got wet its fried, replace it.
If u mean steering wheel controls you need a patch lead .
How to change a timing belt on a citroen c2 vts
Change password for the start engine for citroen saxo?
press and hold the book symbol on the right hand side of the dash display at the top then scrowl through using the same button to change time use the bottom button when you reach the time section.
how to change diesel filter on citroen berlingo 1.6 2010
were are spark plugs in citroen saxo
how do you change a brake light bulb from a citroen c4 tail light unit. thanks
You need to change the K134 Multifunction Relay module: The Multifunction Module under the IP(Under the Drivers side dashboard) . It is factory part number 90494163 and is around $85 plus tax at the dealer.
Take it to a garage
it screws out