There is no bulb. it is an LCD display soldered to a circuit board. If it got wet its fried, replace it.
There are three bulbs and you'll probably want to change all three.1. Use a flat screwdriver or old spoon to level the bottom of the fascia. The clip at the front is quite long.2. The cover is held by two more clips on either side of the multifunction display. So grasp the cover on either side and pull backwards.3. Display is held by two torx 20 bolts. Be careful not to drop the bolts.4. Bulbs are held by twist connectors. Twist to remove.Clean the bulbs before you insert them.
Usually you don't as they don't usually have bulbs.
it is behind the display in the centre see previous questions on how to change display bulbs, in oreder to be able to change the bulb.
Bad bulbs or multifunction switch
possible multifunction switch, check your headlight bulbs first
There is a bloke on eBay who sells booklets. A step by step procedure on how to decimantle the dash and put the new bulbs in. He also supplies 4 bulbs. It's about �7.99.
Check the bulbs and then the multifunction switch (headlight switch)
Bulbs burned out? Bad switch in multifunction lever? Bad Hi-Beam relay?
There are many bulbs on a vehicle, need to know which bulbs you want to change.
www.corvetteradios.com
Planting at least 5-7 daffodil bulbs together can create a beautiful display in your garden.
If the fuses and bulbs are okay you may have a bad signal switch also known as a multifunction switch.