Insert key and turn so the power comes on
-press & hold the scan/repeat button on the radio until it beeps
-press the #4 key to change the hour #6 for the minutes
-press & hold the scan/repeat button until it beeps
HI! I want to change the clock's time in my 2003 Acura... any ideas? HI! I want to change the clock's time in my 2003 Acura... any ideas?
To change the time on a 2007 Acura RDX clock, first, turn on the vehicle and locate the clock display on the dashboard. Press and hold the "Clock" button until the display starts to flash, then use the "H" (hour) and "M" (minute) buttons to adjust the time. Once the correct time is set, press the "Clock" button again to confirm and exit the setting mode.
You need to switch off the stereo and then you can use the buttons next to the clock to change the time. this also changes the time on the stereo.
If you have navigation go to set up, then on the fourth page you'll see date and time and you can change it there.
To the left of the clock (on a Legend L series) is a little flip down panel. This covers the Hour and minute setting buttons. Simply press and hold the buttons down, and the clock time will change.
There is a little hole next to the "H" for hour and "M" for minute, stick a pin or pen in there and change the time. :)
2 small buttons by volume control dial need to be pushed in to change the displayed time on the radio.
Press and hold the clock button at the same time press seek either way to change the hour and tune disc to change the minute
No
To change the clock time in a 2004 Volvo S80, first turn the ignition to the "On" position without starting the engine. Press and hold the "Menu" button on the dashboard until the clock display appears. Use the "Seek" or "Tune" buttons to adjust the hours and minutes, then press the "Menu" button again to confirm the changes. Make sure to check that the time is set correctly after making adjustments.
Change your DS's clock.
To change the time on a Primex wireless clock, locate the "Set" button on the clock and press it. Enter the current time using the keypad provided and press "Enter" once done. The clock should now display the updated time.