0
To change the cooling fan on a 1998 Mercury Mystique, start by disconnecting the battery to ensure safety. Remove the radiator support cover and the bolts securing the fan shroud to access the fan. Disconnect the electrical connector and any hoses that may obstruct removal. Finally, unbolt the fan from the shroud, replace it with the new fan, and reassemble everything in reverse order.
What else can I help you with?
How do you change an alternator on a 1998 Mercury Mystique?
it's complicated,you need a professional mechanic
Where is the iac valve located on a 1998 Mercury Mystique?
were is the iac locate on a 1999 mercury mystique
What is the gas tank capacity on 1998 Mercury Mystique?
According to the 1998 Mercury Mystique Owner Guide : ( 61.5 litres / 16.2 U.S. gallons )
How do you change the oil filter in a Mercury Mystique 1998?
The oil filter on a 1998 Mercury Mystique is changed by lifting the vehicle up on ramps, placing a drain pan under the filter, and unscrewing it. A new filter is then put in place and torqued down.
Where is the fuel filter on a 1998 Mercury Mystique?
under the rear passenger side of the car, pretty easy to change.
Are the parts for 1998 Ford Contour and 1998 Mercury Mystique interchangeable?
yes
What is the oil capacity for a 1998 Mercury Mystique 2.0 liter?
4.5 quarts ( 4.25 liters ) with oil filter change
Does a 1998 Mercury Mystique have a distributor cap?
No , coil pack
What type engine oil should you use for 1998 mercury mystique 6 cylinder?
According to the 1998 Mercury Mystique Owner Guide : With engine oil filter change : The 2.5 liter V6 engine takes ( 5.5 liters / 5.8 U.S. quarts of 5W-30 )
How much oil does a 1998 mystique 6-cylinder hold?
According to the 1998 Mercury Mystique owners manual : For the 2.5 liter V6 engine : With engine oil filter change : ( 5.8 U.S. quarts / 5.5 litres )
Is the 1998 Mercury Mystique a obd1 or obd2?
That should be OBD 2
How hard is it to replace ERG Valves in a 1998 Mercury Mystique?
Replacing ERG Valves in a 1998 Mercury Mystique is fairly hard because it requires great precision to avoid blocking the EGR passage.
