Want this question answered?
there is screws around the door panel and the right under the handle there is 2 of them then your door is off hope this helps you :)
You remove it and replace it...
you get a 38 rench then get a 4 9 rench
The door handle of a 1996 Pontiac Grand Prix can be replace because broken units will can not be fixed. To replace a handle remove the unit from the door and unhinged the locking mechanism.
Remove the fuel cap on the 2003 Pontiac. Remove the plastic cover around the filler pipe by taking the two screws out. Under the plastic there are two nuts that hold the door and hinge assembly on. Remove them and the door will come off.
get a book and find out numptey
2005 ford escape door handle inside and outside the suv will not open the door
Roll the glass up and then take inner door panel off and deflector water paper, unhook all the rods to the door handle and take the 2 -10 mil. bolts out of the handle and pull the handle out.
Look in the glove box there is a black door open it and its there
You will need to remove the inside door panel of your Chevy truck. Remove the door handle linkage. Remove the door handle retaining bolts. Reverse the process to install the new door handle.
I have replaced door handle on my 1993, you have to remove the interior door pannel. If it is broke off from door handle look at junk yards for a new handle, if you need the clips that hold it on check with a local gm dealer they sometimes have them or you can order them.
To change a door handle on a 2004 Mitsubishi Endeavor, remove the 2 screws of the face plate. Then remove the 2 screws on the knob plate. Remove the door handle and replace with new.