disconnect driveshaft, use long bolts to slide the tranny back use a small prybar or long screwdriver to turn the flywheel, it is attached to the torque converter, make sure bolts are tight when reinstalling the fly
no the 96 steering wheel is different
Yes
Dynamite would probably work
A Dodge 2500 has 8 per wheel.
The Dodge Dakota pickup truck has CV joints on both front wheels. The pickup truck also has a driveshaft, as it is rear wheel drive.
To change the brake rotors on a 1977 Dodge W200 pickup, first lift the vehicle and secure it on jack stands. Remove the wheel and brake caliper, then detach the caliper bracket if necessary. Slide off the old rotor and replace it with the new one, ensuring it's properly seated. Reassemble the caliper and wheel, then lower the vehicle and test the brakes before driving.
A wrench
yes 1973 to 1983 will work because this is before 1984 when wipers moved to the column in the full size trucks. it will bolt right in directly. good luck
Not with the rear wheels on the ground.
On my 95 pickup ,on right side of steering wheel under dash.
Trust me, if you want a pickup with 4 wheel drive you are better off buying one that has it already.
youll most likely have to buy the whole hub assembly. I had to do that to my 94 dodge dakota.