answersLogoWhite

0


Best Answer

1.Put front of vehicle on jack stands. Brace back wheels

2. Remove front wheel.

3. Using the C-Clamp squeeze the caliper so the piston goes back inside the caliper.

4. Using the 9/16 socket undo the 2 bolts that go through a rubber boot. There's one on the top of the caliper and the other one is the bottom of the [brake caliper. The reason I said not to use a deep socket is that the torsion bar link is kinda in the way so you can't fit a deep socket in there.

5. Once the 2 bolts are removed, remove the wire retaining clips. One wraps around the top pin that holds the brake pads together and the other clips onto the top and bottom pin. Remove the one that goes from the top pin to the bottom pin. You will not be able to take the other one out just yet.

6. Using your center punch or screw driver tap both pins out of the caliper. You will at this point be able to remove the other wire retaining clip.

7. At this point the caliper should be loose and you should be able to remove it. If you are just changing the brake pads then you're half way done. Replace old pads with new pads and reassemble in the reverse order.

8. If you are replacing the rotors as well then all you need to do is loosen both Phillips head screws that are holding the rotors to the hub. Be careful with the screws I happened to strip the head on one of these babies and let me tell ya it wasn't easy taking it out. Once the screws are removed the rotor should come right off. Might need a hammer to persuade it a little.

9. Install new rotor and brake pads and you are done.

It took me roughly 1 hour to do the brake job.

All in all it's a fairly straight foward brake job.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you change the front brakes on a 2005 kia Rio?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Change the front disc brakes on a Kia Rio?

To change the front disc brakes on a Kia Rio, simply remove the assembly held by two bolts. Push the piston back and replace the disc brakes with new.


What is the front hip room in the 2005 Kia Rio?

The 2005 Kia Rio has 51.6 in. of front hip room.


What is the front leg room in the 2005 Kia Rio?

The 2005 Kia Rio has 42.4 in. of front leg room.


What is the front shoulder room in the 2005 Kia Rio?

The 2005 Kia Rio has 53.2 in. of front shoulder room.


What is the front track of the 2005 Kia Rio?

The front track of the 2005 Kia Rio is 4 ft. 8.3 in. (56.3 in.).


Is the 2005 Kia Rio front wheel drive rear wheel drive or four wheel drive?

The 2005 Kia Rio has front wheel drive.


How wide is the 2005 Kia Rio?

The 2005 Kia Rio is 5 ft. 6.1 in. (66.1 in.)12V front power outlet(s) wide.


How do you change the tail light on a 2005 Kia Rio?

Go to eHow for the complete instructions. Search for the phrase, "How to Change a 2005 Kia Rio Tail Light". If a video instructional is preferred, go to Google and search for "Brake Light Change 2001-2005 Kia Rio" and click on the first search result.


Why would the brake and dash lights not work on a 2005 Kia Rio?

Change the lightbulb.


How many valves does the 2005 Kia Rio have?

The 2005 Kia Rio has 16 valves.


How do you change the MAPP sensor on a Kia Rio?

there is no MAP sensor on a Kia Rio from 2001 to 2005 they have Mass Air Flow Meters, and to change that you will have to remove the air box sitting next to the firewall as it it bolted to that box


How do you change a passanger side front CV joint in a 2002 Kia Rio?

best of taking it to a mechanic