I have a similar question, did you find out?
The minimum front brake rotor thickness is three aids of an inch. When the rotor does not have the minimum thickness the auto mechanic replacing the brakes can not use the rotor.
Change front brake rotors on a 1998 Hyundai Accent?
How do you change a 1998 jimmy 4X4 front wheel bearing ?
Warped rotor is the most likely cause.
For a 1998 Mazda 626 the minimum thickness is .866 inches for the front rotor and .315 inches for the rear rotor. This is the same for the 4 and 6 cylinder versions.
Remoce wheels Remove 2 caliper mounting bolts Slide caliper off rotor Remove rotor
To change a CV Axle on a 1998 Mercury Villager, take off the front tire and the caliper assembly. Take off the pad and the rotor. Disconnect the steering knuckle and pull the CV axle off. Replace with new and reinstall the parts.
Lexus IS was created in 1998.
i need to see 1998 front assembely lexus g300
change them
Jack it up (make sure to use jack stands), remove tire. I assume you are talking about front rotors as the back is a drum. There are 2 12mm bolts on the back side of the caliper that need to be removed then the caliper should be easily removed from the rotor. At this point the rotor will just slide off the hub.
Lexus RX was created in 1998.