Take it to the shop if u don't no
When they start sqeeking mate
To change the brake pads on a 1991 Chevrolet Caprice, you will need some tools. You're going to need a c-clamp, a hex key or Allen wrench to remove the calipers, and a wrench to bleed the lines.
Depends on what type of 1991 Buick you're referring to...
brakes on all 4 wheels
its a wrap get an new engine
The starter on a 1991 Caprice 350 (5.7 liter) is located on the passenger side mounted to the bottom of the block near the rear of the engine and the front of the transmission.
The fuse box is only accessible on the driver's side with the front door open. Pop the panel cover to change the fuses.
front and back both should be 5 X 5
To change the front shocks on a 1991 Honda CRX, first, lift the vehicle and secure it on jack stands. Remove the front wheels and then detach the shock absorber from the top mount under the hood and the lower control arm. You may need to compress the springs if you're replacing the entire strut assembly. Finally, install the new shocks in reverse order, ensuring all bolts are torqued to the manufacturer's specifications.
you need a 20mm and 5/8 wrench and it is located under car on frame rail just in front of rear tire.
There is no trunk release on a 1991 Chevy Caprice.
Car speaker fit guide - CHEVROLET CAPRICE CLASSIC 1991 According to our database, here are the speakers types that go in your CHEVROLET CAPRICE CLASSIC 1991 car, along with their location: * Front: 4" x 6" * Rear: 6" x 9" * Front door: 4" x 6" * Rear deck: 6" x 9"