You will have to remove the transmission and torque converter from the car to get to the front seal.
you will have to pull the tranny out to change it and then you can pop it out with a screwdriver.
No
Just remove the bolt that holds it to the front of the engine and take it off.
Um........no, no you can.
The 1994 Chevy Camaro horn is located in the front of the engine compartment. The horn will be on the right hand side of the radiator.
How many what does a Camaro have? seats? 2 in the front lights? 4 please be more specific.
It is between the torque converter and the front pump of the transmission. The transmission or engine has to be removed to gain access to the front transmission seal.
all camaros are rear whell drive
how to change front shocks in 01 Chevy s10
rear main seal is the gasket around the crank between the rear of the motor and the transmission. front and rear main seals are usual spots for oil leaks.
If your camaro has a manual transmission your starter will be on the passenger side of the of the engine right in front of the transmission and i dont think you need to remove the transmission but there should be twobolts that should be visible from underneath and as soon as you remove them just pull it forward and it should just slide out. After that you just need to remove the power cables and reverse the process. That is how it was on my car and if it is off i apologize. good luck
The firing order on the Chevy camaro is 18436572 -- 1,3,5,7 being on the left (driver side) front to back and the 2,4,6,8, being right side -- front to back !