I posted this question and have since replaced the bearings. Since an answer was not posted I will answer it myself. It's not too difficult. You need a 32mm Socket to remove the retaining nut. An inverted star socket(similar to a reverse torx wrench)is needed to remove the bolts holding the bearings in place(I think it takes a #16 inverted star bit). You also need a hub puller to remove the bearing assembly from the drive shaft. Good Luck!
behind the drivers front wheel.
There wasn't a 1991 Dodge Stratus.
the front wheel bearings are a sealed unit, requiring a front hub assembly. when i bought mine it was a dealer item only
How do I change the spark plug wires in a 1997 dodge stratus? It seems that there are three plugs and wires that are easy to get to on the front of the engine, but the other three are somewhere behind the engine near the firewall. Thank you.
The battery is located in front of the left front wheel. You will need to remove the inner fender liner to access.
take off front bumper and you will see the screws holding it in place
No, a Stratus engine sits transverse, while the Intrepid sits front to back.
Struts
Behind the front motormount
Remove the front driver side tire. There is a panel that comes off to expose the battery.
WHAT YEAR IS IT? is it four wheel drive, two wheel drive?
left front fender, in front of tire