this wheel bearing is sealed and the whole bearing needs to replaced. take tire off and brake assembely. bungie cord the brake calliper out of the way and so the weight is not all hanging on the brake line. take the cap off the nut that is held by a pin. next step your problably don't have the proper tools to do. but you need to have a deep well socket that will fit that nut that's on the spindle. the hardest part will be to remove that nut. with a proper air gun and that socket you can get that off easily. once that's off take off the rotor and bearing put the back on the rotor and put back on spindle . that nut that was so hard to take off needs to torqued back on at manufacture specs put cap and pin in and put back brake assembly. i.e take cap off brake fluid so the brake callipers come off more easily and on.
how do you change front wheel bearing for 420 rancher
How do you change a 1998 jimmy 4X4 front wheel bearing ?
Need to know if 2 wheel or 4 wheel drive for the front. Either way, there is no nut on the back axles.
If it is 4x4, you have to replace the whole hub
When you change rotor or main ball joint, or when they get worn.
the front wheel bearings are a sealed unit, requiring a front hub assembly. when i bought mine it was a dealer item only
If you are referring to the front bearings, you have to buy a complete hub assembly.
how do i replace front wheel bearings on golf 1.6 2002 model
You can change the front wheel bearings on your 2000 Buick Regal without replacing the entire hub assembly. You can change each individual wheel bearing, if you choose.
front hub removal dispatch
sorry to have to tell you this but the bearings are part of the wheel hub and sealed within. you need to change the entire hub. $$$$$$$
Front or Rear? Both