I picked up the replacement bulb at autozone for just under $20 (probably find cheaper online) Sylvania H13 9008. Went to toss it in and the headlight would not come out.. I started to remove the frontend of the my wfie's Denali when I stopped and decided to search online for better way... THIS IS THE BEST WAY I FOUND AFTER SEARCHING 30mins and it works.. Took me about 15min.
Driver side: There are about 8 screws that hold the "spare battery plate" (the battery is on the other side this just looks like an add on plate for a 2nd battery). The washer bottle is also connected to this plate by a screw and I think there is a second screw that holds the bottle to the fender wall, remove that. The washer bottle should drop down a few inches at this point. The neck of the bottle can be pushed out of the way. There is a rubber wrap with some snaps directly behind the headlight. Gently remove the top snap and it will give you access to the headlight. The bulb twists out replace it and reverse the re-assembly.
Passenger side: You basically have to remove the airbox, which in reality is pretty easy. There is a clamp at the airbox for the air tube, loosen the clamp and pull the box up and out. this side also has the rubber wrap behind the headlight with the snaps. Loosen the top snap, access the bulb and re-assembly.
Working slowly the whole process probably doesnt take more than 20 mins a side for the first time.
I found this info from a genius on truckforum.org named "Crmzendrgone". Thanks brother!
Use socket
If this is the headlight bulb, it is attached to the connector as one piece.
How do I change the nearside headlight bulb on my Vauxhall Vectra 2007
you will probably have to take the complete headlight assembly out to get enough room to change the bulb.
can you change the reflectors on a 2007 vectra
Changing a headlight bulb in a 2007 Buick Lacrosse can be done easily. Just remove the cover piece and change the bulb.
how do I change lightbulb for a 2007 escalade
No
Changing a 2007 headlight bulb is very easy. You will need to open the hood and find the bulb at the corner of the headlight assembly. Then you will turn the bulb socket counter clockwise to remove. After the bulb is out, you will replace it with a new one and screw it back into the headlight assembly.
My headlight is not working on the passengers side. Do I need to change out the headlight assembly or can I simply change out the bulb? My headlight is not working on the passengers side. Do I need to change out the headlight assembly or can I simply change out the bulb?
To change headlight on a 2007 Mazda 3, open the engine compartment hood and locate the back of the headlight to be changed. Twist the bulb off and replace.?æ
2008 GMC Yukon headlight bulb replacement: Purchase the correct replacement headlight bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the headlight bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).