take the metal trim piece out from around the light with the torques bit and the light should pop out, just unplug it and install new light.
Begin by removing the wiring harness from the back of your 1989 Silverado headlight assembly. Remove the low beam headlight assembly retaining bolts. Reverse the process to install your new low beam headlight.
There is a bolt with a torx bit head on it behind the headlight if i remember right there should be two of them one is for up and down the other is for in and out.
Come to our enthusiasts forum and find out www.trailvoy.com
lift the hood it is on the right side.
low beam headlight bulb type: 9006
no it don't
You Have a bad headlight, it's common when a headlight burns out for only the high beam to work, solution change your headlight.
Carry it to dealer who will replace on low beam headlight for $15 +/- dollars in about 5 minutes.
9006 low-beam; 9005 high-beam. See sources and related links below.
take any headlight grill off and then you will see the silver ring around the headlight, there are 3 phillip head screws that hold that ring in place, take the screws loose and twist the ring and then the headlight will come out.
please answer the question
with ur hands