Hydraulic fluid could be used in two locations on your 1993 saturn. your brake system is of course Hydraulic, in this case, the easiest way to change the fluid is to obtain a vacuum brake bleeder kit from your local parts store. you will need to loosen each bleeder screw on all 4 wheels and attach the vacuum bleeder. keep an eye on the fluid level in the master cylinder so it doesnt get too low. 1 large bottle of brake fluid is enough to do an entire vehicle. If you are talking about the clutch fluid, which is also hydraulic, there is no method of changing the fluid. the unit is sealed and offers no bleeder.
yOU CAN'T....iT'S HYDRAULIC. If it's releasing high you need a clutch.If it's low you need a hydraulic unit
There is a red dipstick.
For a 1993 Ford Ranger : ( DOT 3 brake fluid , meeting Ford specification ESA-M6C25-A ) is used as a fluid for the hydraulic clutch
It's a hydraulic clutch ( the clutch fluid reservoir is near the brake master cylinder )
Dexron II
Saturn radiators don't have caps to check and add fluid to the radiator you open the overflow tank and add it there
Have you kept up on the filter and fluid changes? Is the fluid low?
Under the hood, under the brake fluid reservoir.
How many quarts of transmission fluid is required to change transmission fluid in a 1993 150 Ford Van?
if its a manual yes. for an automatic i never try it but Saturn don't like to change its dam possible
You would have to change the computer wiring harness etc
4 quarts with filter change