0
What else can I help you with?
How change lifters on a 200 cid 6-cylinder?
To change the lifters on a 200 cid 6-cylinder engine, first, remove the valve cover and rocker arms to access the lifters. Then, carefully remove the intake manifold and any necessary components to reach the lifters. Replace the old lifters with new ones, ensuring they are properly seated, and reassemble the parts in reverse order. Finally, adjust the rocker arms as needed and check for proper operation before starting the engine.
Ehat are the torque wheel bearing settings for 2002 Pontiac sunfire?
The torque specifications are actually determined by the bearing manufacturer. However 148 ft-lbs or 200 Nm seems to be the common spec.
How much for a tuneup on Pontiac g6?
200$
Why wont your 200 Pontiac Grand Am shift?
transmission no good
Is 200 temperature to high for a Pontiac g6?
Nope. That is perfect
How much horsepower does a v6 1997 Pontiac firebird have?
200
What is the maximum speed of Pontiac Bonneville 1993?
200 km/h.
What does the serpentine belt on a Pontiac gtp run?
i have a 98' Pontiac grand prix gtp. i got the 2 serpentine belts replaced for $200.
What is the normal running temp for a 2001 Pontiac grand am gt?
200-220
What is the percent change from initial value of 200 to a new value of 204?
Change = 204-200 = 4 % change = 100*4/200 = 2%
What is the Lifters on 1997 Toyota Camry LE V6 Engine is very noisy?
Are you sure that the lifters are creating the noise? I have had a 94 LE and a 99 CE Camry 4 cyl. and have had the same noise in the AC compressor. Dealer claimed it was the belts slapping the timing cover and wanted $1,200 to fix. I got the timing belt water pump and all tune up parts for $200 and did it myself. While the sound is still there I found out from a local mechanic that the toyo compressors have a bad habit of rattling like lifters. hope this helped.AnswerIs it possible that it is time for a oil change?Sometimes a speck of dirt gets in the lifter[s] and that makes them act as solid lifters,thus the noise. ....
What size socket do you need for the axle nut on a 200 Pontiac Montana?
34 mm
