Want this question answered?
light bulb out on map light how to change with out breaking plastic lens
Underneath the steering wheel, down near the parking break. If you look at the parking break, it is behind it and upward, you should see a grey box with a fuse map on it. The grey cover comes off and the fuses are underneath
Behind the small change storage to the left of the steering wheel.
You don't. If your Santa Fe only has the front map lights which don't come on when the doors open up there is a fix. Contact HMA and start a case with them. Hyundai has a service policy update which replaces the current map light(s) with ones that will come on along with the rear dome light and cargo area light when a door is opened up. It took my local Hyundai dealer a month of Sundays to get going and order the part/perform the work but it was well worth it.
To change the map light in a 2005 Town and Country, first lower the sunglass holder. Remove the single screw holding the console and firmly pull down the entire console from the rear. It will release the two clips allowing the entire console to be removed and the map light can be changed.
AnswerThe fuses are behind the tilt out box to the left of the steering wheel. When you remove the tilt out box the fuse box map is located on the back of the box.try googling 2003 Hyundai Elantra overhead light fuse or fuse box location. Hope that helps
Carefully remove the lens then bulb
The map light on a 2004 Dodge Grand Caravan SXT is changed gently prying the edge of the cover to reveal the bulb. The bulb can then be popped out and a new bulb installed.
Just pop off the plastic lens... easiest if you pry from the middle.
It depends. If the sensor is working, just reset the computer. Otherwise you have to change the sensor.
Visit this website and look at picture of MAP sensor on 1999 Hyundai Accent, http://www.rockauto.com/catalog/raframecatalog.php?carcode=1355688&parttype=5124&a=FRc1355688k1262718
Take the old one out, and put thenew one in! Easy, right?