remove the wheel then the brake drum then tap out the old studs with a hammer and pull in the new stud with some washers to protect the threads and tightening the nut until the stud is fully home reinstall the drum and the wheel and torque bolts and you are done good luck
auto or manual hubs
Yes.. I Have a 1990 F-150 4X4 and it is a 5-Speed Manual Transmission
F150s had a 5/135 stud pattern ( 5 lug, 135mm pcd ) from 1997 to 2003, with 12mm diam studs. F150 XLs were 7/150 with 14mm studs.
2 or 4 wheel drive makes a big difference. Need more info.
f150 can a4 wheel drive wheel fit on a 2 wheel drive f150 both 6 bolt pattern
Near the starter on the exhaust header. If it is 1990 it will be fun to break the rusty sensor out of the truck. good luck
Open the bleeder valve on the 1990 F150 wheel that needs a line replaced. When the fluid stops flowing, loosen the line connections and remove the line. Install the new line, and bleed the brake lines after the reservoir has been refilled.
No , rear wheel drive or 4X4 capable
rear wheel drive or 4x4 capable
No , rear wheel or 4x4
( 6 ) per wheel
In order to determine the size brake line for a 1990 Ford T F 150, you will need to know the size of your drum wheel cylinders. You also will need to know what kind of disc calipers you have.