To change the serpentine belt on a 2005 Ford Excursion 6.0 diesel, first, locate the belt tensioner and use a wrench or ratchet to relieve tension on the belt. Carefully slide the belt off the pulleys, noting its routing for reinstallation. Once the old belt is removed, place the new belt onto the pulleys according to the routing diagram, then release the tensioner to secure the belt in place. Finally, double-check the installation before starting the engine to ensure proper alignment.
Prime a Diesel
how do you change the serpentine belt on a 2005 kia sodna
6.0L Power Stroke Diesel 2003 - 2007 F250, F350 pickup and F350+ Cab Chassis, 2003 - 2005 Excursion and 2003 - 2009 vanSPONSORED BY:
Ask your dealership for a 2006 diagram for the same vehicle.
Change the fuel pump. You have to remove the fuel tank and use a special tool to get the pump out.
2005 was the last model year for the Ford Excursion
The 2005 Ford Excursion Owner Guide shows ( 6 quarts with engine oil filter change ) for the 6.8 liter - V10 engine
For a 2000 to 2005 Ford Excursion , with the 6.8 liter gasoline V10 engine : With engine oil filter change : ( 6.0 U.S. quarts / 5.7 litres of engine oil )
A 2005 Ford Excursion has a 44 U.S. gallon tank ( 166.4 liters )
When it is loose, cracked or glazed, or at the interval specified in your service guide.
a good diagram is on www.hondacr-v.com/2005/serpentine/belt/diagram/
how to replace drive belt on a 2005 ford escape XLT 3.0 V-6