# Disconnect the negative battery cable # Remove the air intake duct and the air cleaner assembly # Disconnect the speedometer cable from the transaxle # Unscrew the nut and disconnect the battery cable from the starter motor then disconnect the wiring from the solenoid # Remove the starter motor mounting bolts,supporting the starter motor as the bolts are removed and remove the starter motor
THe starter/solenoid is bolted to the transaxle bellhousing
Most auto parts stores can get you a wiring diagram for a 1996 Hyundai Elantra. If not in stock, the store can order a diagram for you.
Its should be same thing
To locate the starter relay on a 1996 Hyundai Elantra wagon, first, open the hood and find the fuse box, which is typically located near the battery. The starter relay is usually located inside this fuse box; you may need to consult the diagram on the fuse box cover to identify the specific relay. If you can't find it there, check the owner's manual for the exact location and details.
how to replace front wheel bearing on 1996 Hyundai elentra
The recommended type of engine oil for a 1996 Hyundai Elantra is 5 W 20. The vehicle will hold approximately 5 quarts of oil.
4.2 qts
SpIII
Anything made after 1996 I think is OBD2.
you could go to radio shack and get an installation kit for 96' elantra and it is self explanatory.
Under the left front headlight.The headlight has to be removed to access it.
mine did same, 95 elantra. it was fuse for radio in fuse box. hope that helps.