0
Open rear door hatch. There you will see two or three Phillip screws holding the tail lamp / Lens assembly in place. Remove the screws. The assembly will not just pop out, as it is held in place at the far end by two 'plug in' type prongs, along with one in the front by the screws. I used a screwdriver to pop the assembly away from the body. Be careful though and cover the screwdriver tip with a rag or something to prevent it from chipping the paint.
You will then see two light bulbs held in the assembly. The top one is the brake light/turn signal bulb and the other is the back-up bulb. Twist the bulb assembly and it should pop right out. I had to replace the top bulb, which OEM is a Sylvania 4157K. After looking it up on their parts computer, the auto parts store gave me a 4157LL, which said it was a daytime running light on the package. It worked just fine for my rear brake/turn signal. It cost me $6.75 for a package that had 2 bulbs in it. To repace the assembly, just line up the prongs at the front and far end, push it firmly back into place and screw the screws back in. This was updated based on a 2006 Ford Expedition.
What else can I help you with?
Why does right front blinker not work on 2000 expedition?
Replace bulb and check socket for ground and Hot
How do you change freeze plus on 2000 expedition?
How to change freeze plugs on 2000 expedition
Where and what fuse need to be changed if blinker doesnt work on a 2000 Alero Oldsmobile?
change the flasher
How do you change the blinker bulb on a 2000 Honda Civic?
Simply look behind the light (from inside the trunk or under the hood), and you access the bulb from their. turn the backing of the bulb to release it and simply change the bulb. A simple fix.
How do you change the blinker switch on a 2000 Ford Escort zx2?
dsdfsd how to change a fuel pump on a 1999 ford escort zx2
How do you Change rear blinker bulb in a 2000 escalade?
Begin by removing the connector from the back of your 2000 Cadillac Escalade tail light assembly. Remove the turn signal lightbulb. Reverse the process to install your new lightbulb.
Why wont your dashboard light work in a 2000 expedition?
Check fuses and light bulbs
Why does the cruise control go off when blinker light is turned on 2000 olds intrigue?
In the 2000 Oldsmobile Intrigue, the cruise control system may deactivate when the blinker light is turned on as a safety feature. This design ensures that drivers remain in full control of the vehicle when signaling a lane change or turn, allowing them to adjust their speed as needed. Additionally, it may be related to the vehicle's electrical system, where the activation of the blinker interrupts the cruise control function. If this behavior seems abnormal, it could indicate a malfunction that should be checked by a mechanic.
How do you change gear shift cable 2000 xlt expedition?
Type your answer here... how do you replace the shift cable on a 2000 expedition 5.4 liter
How do you change the battery on a 2000 Ford Expedition?
Are there issues with the electronics?
What do i do if my right turn signal doesn't blink when i turn it on it's a 2000 camaro the dash light and the blinker just stay lit?
a bad blinker bulb. replace the bad one and it'll blink fine.
Why does my 2000 expedition have a theft light that flashes when truck is off?
When your Expedition is shut off and securely locked up , the theft light flashes to indicate the alarm system is armed
