0
If you were to disassemble the entire transmission, the last part to come out would be the tail shaft.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you get the tail shaft out of 350 turbo trans. how do you get it out?
c4
How do you get the tail shaft out of 350 turbo trans?
It would require the complete disassembly of the transmission because the tail shaft is the last part to come out of the transmission housing.
How do you get the tail shaft out of 350 turbo trans how do you get it out?
If you are talking about the SPLND STEEL center shaft that the driveshaft slides over, Then you will have to take the transmission APART to remove the shaft.
Are 4 wheel drive turbo 350 transmissions different then regular turbo 350 transmissions?
the 2wd turbo 350 has a longer tail shaft NEW ANSWER: The center shaft in a 4x4 transmission is longer then a 2 wheel drive trans. The reason is that it has a transfur case on the end of it, and the center shaft must fit into the transfur case to make it work.
Turbo 350 transmission that leaks from rear of trans where drive shaft installs if you let it sit for more than a week how do you fix this?
replace tail shaft seal. to do this, remove drive shaft first. It helps if the front of the car is pointed down a steep hill. This way you won't loose any trans fluid.
Is a 1966 400 trans the same as 1973 400 trans?
Yes...they are the same. The only thing to look for is the tail shaft length. There is a a short shaft and long shaft.
Can you put a 700r4 transmission tail shaft out put shaft and housing on a turbo 350?
no it will not fit at all
What is the difference between a short neck and a long neck transmission?
short tail shaft or long tail shaft trans they are different lengths
Will the tail shaft interchange from a turbo 350 to a 400 turbo?
No it will NOT interchange. The 350 and 400 turbo are actually VERY different transmissions.
What size 350 Turbo fit a 350 Engine 6 or 9 tail?
There were turbo 350's with both a short and long tail shaft that fit a chevy. Long shaft were common from 71-76.
Will a transmission from a 1983 4X4 S10 blazer work in a 1986 2wheel drive S10 blazer if you change out the tail shafts.Both are 2.8 liter?
The shaft inside the trans will have to be changed it is longer in a 2 wheel drive and the taIL SHAFT.
Which turbo 350 is the same length as a 700r4?
9 inch tail shaft
