There is a series of screw in studs and you have to remove them all and then bend out the arch liner.
To change the inner wheel arch liner on a Peugeot 307, first, ensure the vehicle is securely lifted and supported. Remove the wheel for easier access, then unscrew and detach the existing liner using the appropriate tools, typically a socket or screwdriver. Once removed, position the new liner in place, align it with the mounting points, and secure it with screws or clips. Finally, replace the wheel, lower the vehicle, and check for a proper fit.
To remove the wheel arch liner in a Peugeot 106 Independence, first, ensure the vehicle is safely elevated and secure. Start by removing any screws or fasteners holding the liner in place, typically found along the edges. You may need to detach clips or bolts that secure the liner to the body of the car, and then gently pull the liner away from the wheel arch. Be cautious not to damage any surrounding components during the removal process.
best way is to unclip the wheel arch liner pull it back and change it from there, if you have a facelift model the liner has a access flap to get to the bulbs.
both washer pumps are under wheel arch liner. drivers side front, remove arch liner bolts,push back liner 3 bolts hold washer bottle,you have to take indcator out to access one of the bolts.other 2 under wheel arch.
under the drivers wheel arch liner, why ?
You cant as no one on the internet will tell you
To remove the inner wheel arch on a Peugeot 206, start by safely lifting the vehicle and removing the wheel for better access. Unscrew any fasteners, such as screws or clips, that secure the inner arch to the body and wheel well. Carefully pull the inner arch away from the vehicle, ensuring you don’t damage any attached components. Finally, check for any remaining clips or bolts before fully detaching the arch.
In the passenger side wheel arch. You have to remove the wheel & liner to get at the valve.
Assuming you mean a front fog light, you have to remove the road wheel and then the wheel arch liner, if it's the offside light you will also have to remove the windscreen washer bottle in order to access the fixing screws. I did one myself today and it took me about two and a half hours, a very fiddly job as indeed most jobs on cars are!
its in the side of the washer bottle located in front of the offside wheel beyond the plastic wheel arch liner, ideally remove o/s/f wheel & liner 1st :-)
To change the windshield washer reservoir on a Peugeot 307, first, disconnect the negative battery terminal for safety. Remove any necessary components, such as the front bumper or wheel arch liner, to access the reservoir. Disconnect the washer fluid hoses and electrical connectors, then unbolt the reservoir from its mounting points. Replace it with the new reservoir, reattach the hoses and connectors, and finally reassemble any removed components.