Drain the radiator. Remove the top hose, and the water inlet. Remove the thermostat from under the inlet, and replace it. Reverse the steps to finish the installation.
push the bottom far right then left then to the degrees u want<>=] Diagram of where the thermostat goes and how to install it.
Follow the top radiator hose to the engine and find a bulborous part device the hose is attached to. The thermostat is inside there.
yes, there is plenty of room for it, you will just have to change motor mounts if your car is a V6.
Yes
From 88 to 99 will interchange.
follow the top rad hose one end goes in rad the other in the thermostat housing
www.motorcraft.com shows it as ( RT 1161 ) 190 Fahrenheit / 88 Celsius thermostat
The thermostat is located inside of the water inlet on top or the engine. Remove the top radiator hose, then the inlet to get to it.
It is under the outlet where the upper radiator hose joins the engine. To change it: Remove the two bolts, the housing comes off and the thermostat is under it. It is a tiny thermostat. To install the new one, you will need two gaskets. The rubber gasket that goes around the thermostat and the regular gasket in between the outlet and the engine block.
do you have link and program a 88 cilverado ecm when replacing
YES.
On a 1997 Oldsmobile 88, the thermostat is located at the engine's front, where the upper radiator hose connects to the engine block. To access it, you typically need to remove the upper radiator hose and the thermostat housing. It's advisable to allow the engine to cool before attempting to replace the thermostat to avoid burns.