You change the control arms, upper and lower. The ball joints are manufactured into the control arms.
How to change upper and lower ball joints on a 1997 ford explorer all wheel drive?
What year, if it has upper it has to be pre 1989
The lower ball joints have to be pressed out. The upper ball joints are part of the control arm, so the complete upper assembly has to be replaced.
Change lower ball joints on a 96 gmC 4 by 4
how do i change a lower ball joint on a 1992 ranger 2wd
Depends on whether you have coil springs or torsion bars.
very carefully
The ball joints are riveted or pressed into the upper and lower control arms, then the spindle is bolted to the ball joints.
The upper ball joints must be replaced with the upper control arms but the lower ball joints can be replaced seperately. NOTE: THE BEST WAY TO GET THEM OUT IS TO KNOCK THEM OUT WITH A 3LB MINI SLEDGE HAMMER FROM AUTOZONE. According to my Haynes repair manual it states that 1995 and newer models upper and lower balljoints are not removable or serviceable. If a balljoint is damaged or worn, replace the control arm.
I think you met joints, and the joints are the upper joint and the lower joint. The order of clarinet peices from the top is mouthpiece, barrel, upper joint, lower joint, bell.
Change upper and lower ball joints the factory ball joints have no fitting for lube. The aftermarket one do
which ones? upper or lower?