how do you change a water pump on a 1985 Yamaha yz 250
How long does it take.to change a waterpump on a 89 f250
This will cost about $250 or so if "they" supply the water pump. It can be a little cheaper if you can purchase your own pump.
how do you know if your fuel pump not working 1983 ford 250 an how do you change it
Take it to a shop. If you do not know where the water pump is located you DON'T need to try and remove it! I promise it will not run right again. Most shops will only charge about $250.
to change water pump.you first remove serpentine belt. then disconnect bottom radiator hose,this will dump the coolant.next remove top radiator hose. remove fan from water pump. this usually requires 2 special wrenches using an 8 mm socket, remove bolts from water pump lift water pump from engine installation is opposite to removal.make sure to clean gasket surfaces properly before replacing with new pump
water pump is in the front, mounted to the block. it has a pully wheel and the fan blades are mounted to the water pump its self.
Drop the gastank and access the fuel assembly wher in your fuel pump will be.
What Year?? What Motor?? With AC or not?
you need a new water pump seal. also check to see if the shaft is worn might need to replace that too you need a new water pump
The aftermarket cost of the fuel pump is in the $250-300 range, plus labor.
To replace the water pump on your vehicle if you do it yourself would be about $65. To have a shop do it, it would cost $250 to $300.
I just replaced my water pump last month and it cost around $200, but could be up to $250 sometimes.