Want this question answered?
how do you locate the clutch master cylinder and check the fluid level of the 1995 ford escort
Check your clutch fluid level or your automatic transmission fluid level.
Check your clutch slave cylinder fluid level it looks like a mini brake fluid bottle
check fluid level in clutch master cylinder reservoir
the clutch is self adjusting you check the fluid level just refer to the manuel
The clutch fluid reservoir is located on the firewall close to the brake master cylinder. You can visually see the level unless the reservoir is to dirty.
Check Hanbrake, Brake fluid level and Clutch fluid level. It could be any of the three.
The clutch fluid reservoir is on the firewall, in front of the driver, immediately to the right of the brake booster. The fluid should be clear, and at the appropriate level as indicated on the side of the reservoir.
check your clutch fluid level and your clutch slave cylinder for leaks,if both are ok,then you probly need a new clutch.
check your fluid level for the clutch master cylinder or the throwout bearing, the clutch release bearing could do this too.
The brakes and clutch share the same reservoir.
There are two normal causes. The clutch is worn out or there is a leak in the hydraulic clutch slave or master cylinder. To check the clutch, press the clutch slave cylinder down. If the clutch slave cylinder bellows compresses down to the slave cylinder, the clutch is worn out. Check the clutch master cylinder fluid level. if this is low, then the clutch cylinder need to be checked. To check for a hydraulic leak in the clutch slave cylinder, remove the cylinder's bellows and check for any fluid. If fluid is present, rebuild or replace the cylinder and bleed the system. To check the clutch master cylinder, check the back the of clutch master cylinder for leaks. If fluid is present, replace or rebuild clutch master cylinder and bleed the system. In my experience, hydraulic leaks occur at the clutch slave cylinder.