answersLogoWhite

0


Best Answer

Unplug it from the accumulator and run a jumper wire between the two holes. If the compressor clutch remains engaged while the jumper wire is in place, the switch is functioning properly.

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you check the AC pressure switch for 1999 cavalier?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you remove the ignition switch on a 1999 Chevy Cavalier?

Remove the retaining ring from the top of your 1999 Chevy Cavalier ignition switch. Slide the ignition switch out and remove the wiring harness from the end of it.


How do you change brake light switch on 1999 Chevy cavalier?

Changing the brake light relay switch on your 1999 Chevy Cavalier is quite easy. The brake light switch simply plugs in and out.


Why would the air conditioning compressor on a 1999 Chevy Cavalier not come on?

Low on freon, faulty pressure switch, faulty clutch. Jumper the low pressure switch with a paperclip (can running, AC on), if the clutch cycles, it's either low on freon, or the low pressure switch is bad.


What do you do when you have no power to the right tail light from the brake switch on a 1999 chev cavalier z24?

Replace the switch.


Why might there be no current going to the ac compressor in a 1999 Chevy Blazer?

Check all of the following............. 1. Pressure switch. 2. Pressure switch pigtail. 3. A/C heater controller.........


Changing oil pressure switch on 1996 Audi A4?

Audi A4 1999 1.9TDi Oil pressure light on continously. Engine sounds fine. How do I remove electrical connector to remove switch and check pressure with a gauge?


Where is the oil pressure switch located on a 1999 Chevy suburban 4x4 2500 454?

where is the oil pressure switch on a 1999 chevy surburban


How do you replace a fuel pressure regulator in a 1999 z24 cavalier?

Remove the fuel rail


How do you unplug the oil pressure switch on a 1999 Chrysler Sebring 2.5 liter?

To unplug the oil pressure switch for a 1999 Chrysler Sebring 2.5, simply remove the connector from the back of the switch. With the switch unplugged, the computer will think the engine has low oil pressure.


How do you get the lower 2 brake lights on a 1999 Chevy cavalier working when it is not the bulbs or brake switch?

If you're positive it's not the bulbs (you know this because you checked them with a meter or tested the outlet with a test light maybe) or switch, check it out for a bad ground.


Where is the trans dip stick for a 1999 cavalier?

If auto Check the rear passenger side of engine


Is there a low fuel light on a 1999 Chevy cavalier?

Yes... the "Check Gauges" light will light.