look under your truck at your transmission,its bolted on with 2 bolts atthe rubbercover,check for leaks,if it is about 20 bucks.
check clutch slave cylinder
Its hydraulic ,you cant,check your slave cylinder to see if its leaking,its located thru a rubber cover on side of transmission,if leaking replace and bleed,also check clutch master cylinder,if not leaking,then you might need a new clutch kit.
your clutch may be slipping ,first check and see if your clutch slave cylinder is leaking,check your clutch master cylinder to see if your fluid level is ok.if level is ok and no leaking slave cylinder,then you probaly need a new cluch.
the clutch is burnt up. buy a clutch kit check your slave cylinder for leaks, its bolted on the side of transmission,if its leaking ,replace,if not ,then it could be u need a new clutch.
check for leaks
Check your clutch master cylinder and slave cylinder for leaks,if no leaks,then you need a new clutch kit.
look at your clutch master cylinder and check fluid, if low ,check your slave cylinder for leaks ,its bolted on your transmission with 2 bolts ,its at where the boot is ,if leaking ,then replace ,if not then u will need anew clutch.
go to your transmission and look at your slave cylinder,its coming thru the rubber cover,see if itsleakingif every thing checks out,then u might need a new clutch. ,if it is ,then it needs to be replaced, about 20.00 bucks,also check your clutch master cylinder for leaks and see if its empty.if nothing is leaking ,then your clutch might need replacing.
check your clutch fluid level and your clutch slave cylinder for leaks,if both are ok,then you probly need a new clutch.
if its hydraulic,u cant,check your slave cylinder for leaks.
There are two normal causes. The clutch is worn out or there is a leak in the hydraulic clutch slave or master cylinder. To check the clutch, press the clutch slave cylinder down. If the clutch slave cylinder bellows compresses down to the slave cylinder, the clutch is worn out. Check the clutch master cylinder fluid level. if this is low, then the clutch cylinder need to be checked. To check for a hydraulic leak in the clutch slave cylinder, remove the cylinder's bellows and check for any fluid. If fluid is present, rebuild or replace the cylinder and bleed the system. To check the clutch master cylinder, check the back the of clutch master cylinder for leaks. If fluid is present, replace or rebuild clutch master cylinder and bleed the system. In my experience, hydraulic leaks occur at the clutch slave cylinder.
first check your clutch slave cylinder for leaks, if its leaking ,replace and bleed system,if its not leaking,bleed system ,dont forget to bleed clutch damperand if its still not right, then replace clutch master cylinder.