Its hydraulic ,you cant,check your slave cylinder to see if its leaking,its located thru a rubber cover on side of transmission,if leaking replace and bleed,also check clutch master cylinder,if not leaking,then you might need a new clutch kit.
no 84 and 85 swap out.
hydraulic clutches cant be adjusted,it might be that your slave cylinder is leaking,look at your transmission,theirs arubber cover that your s. c. is coming thru ,if its leaking,then replace and bleed system ,if not then u need a new clutch.
To adjust the clutch on a 1988 Toyota pickup, first, locate the clutch cable adjustment near the firewall. Loosen the locking nut and turn the adjuster to increase or decrease the cable tension, ensuring there is about 1-1.5 inches of free play at the pedal before it engages. After adjusting, tighten the locking nut and test the clutch pedal feel to ensure proper engagement. If necessary, repeat the adjustment process until the desired tension is achieved.
how do you adjst clutch on 87ford f150
36.5 psi
no they changed in 88.
You will need to remove the transmission to replace the clutch slave.
At the top of the clutch pedal in the cab of the truck.
4.5 qts.
bad piston rings.
89 and 90
you must take front grill off.