To adjust the clutch on a 1988 Toyota pickup, first, locate the clutch cable adjustment near the firewall. Loosen the locking nut and turn the adjuster to increase or decrease the cable tension, ensuring there is about 1-1.5 inches of free play at the pedal before it engages. After adjusting, tighten the locking nut and test the clutch pedal feel to ensure proper engagement. If necessary, repeat the adjustment process until the desired tension is achieved.
how do you adjst clutch on 87ford f150
AutoTrader.com
At the top of the clutch pedal in the cab of the truck.
Its hydraulic ,you cant,check your slave cylinder to see if its leaking,its located thru a rubber cover on side of transmission,if leaking replace and bleed,also check clutch master cylinder,if not leaking,then you might need a new clutch kit.
You will need to remove the transmission to replace the clutch slave.
You just unscrew it.
you don't adjust it. It is a Hydraulic clutch unit. you have to bleed it. There is a 7/16" bleeder valve on the transmission. clay Colorado
17.2 gallons
behind the drivers seat.
17.2 gallons
54mm
For my fuel injected 1988 4x4, 4 cylinder, the gap is 0.0032".