0
pull out the oil dipstick which is the yellow top stick and make sure the car is off pull out the dip stick there is a level it will show you where the oil marking should be if you need to add it just add a quart at a time depending on how low it maybe add the oil by twisting the top off of the top of the engine and pouring your oil inside with or without a funnel filler
What else can I help you with?
Where is the oil temperature sensor located on the 91 Acura Legend?
The 1991 Acura Legend does not have an oil temperature sensor. It does have an oil pressure sensor. The oil pressure sensor will be located on the left-hand side of the engine.
What type oil is used for a 1991 Acura Legend?
you can use 10w30 oil or 10w40 either one will work
What weight of oil do you use on a 1991 Acura Legend?
you can use 10w30 or 10w40 either is fine
How much oil 1989 Acura Legend?
how many oil quarts do you put in 1989 acura legend when changing oil
What size is the oil drain plug on a 1993 Acura Legend?
The oil drain plug on a 1993 Acura Legend is 14mm x 1.5
Where is the oil pump on a 1994 Acura Legend?
In the oil pan
What motor oil should you use for 1990 Acura Legend?
I used Valvoline VV155 MaxLife SAE 5w30 Motor Oil in my 1990 acura legend
What kind of oil does a 1989 Acura Legend take?
The manufacturer of the 1989 Acura Legend recommends 10W-30 motor oil. A heavier motor oil can be used in extreme climates.
What is wrong with the engine of the 1991 Acura Legend when after it has been running for a while a burning oil smell occurs?
Gasket is leaking oil. Valve cover gasket is likely suspect.
What kind of oil you put in a 1990 Acura Legend?
Vegetable Oil for the rice burner.
How do you check the transmission fluid on your 1992 Acura Legend?
there should be a dip stick with a yellow handle behind the oil tank, closest to the windshield.
How do you change the oil pan on a 1995 Acura Legend?
The oil pan on a 1995 Acura Legend is changed by draining the oil, removing the retaining bolts, and lowering it from the engine. The components are then cleans, a new gasket installed, and the pan bolted back in place.
