You would need a gauge that taps into where sender goes on block.
That light is for low oil pressure, not low level.
The oil pressure light is on due to the fact that there is no pressure from the oil, fill it up, and if that does not fix it, check for faulty wiring. P.S. There is no such thing as "Blinker Fluid."
check the oil pressure snding unit first then check the pressure gage if both are good you need to replace oil pump Oil pumps in buick 3800,s do not go bad. Replace sending unit or the oil pump pickup screen is clogged.
check oil pressure with a gauge possible bad pump or engine is tired
You need to check the oil pressure with a mechanical gauge.
The oil pressure switch on a 1997 Chevy Blazer is located on the bottom of the engine, near the oil filter. It monitors the output and pressure of the oil pump.
oil pressure switch sends message to oil pressure gauge in dashboard,telling what the oil pressure in engine is
first check your oil level. If that is full (8qts) and your low oil pressure light is still on then your piston rings are worn. I would recommend a top engine rebuild.
You need to check your oil, sounds like you are dangerously low!! Be sure to check it to see how low you are and then add the needed amount...
Your oil pressure sending unit is bad or the oil pump is bad. I would check the sending unit first
The oil pressure sensor screws in next to the oil filter on the front of the engine on a 1999 Chrysler Town and Country.
where the oil pressure sensor located on 1997 Honda Civic EX 1.6L