Want this question answered?
its under the intake and i would wipe it down with a rag if it needs it you might have to clean the line though
Back flushing an engine refers to connecting a garden hose to a special coupler added to the heater core hose, then pumping fresh water through the system to clean out old coolant. This helps to insure that you have a clean coolant system.
how can I clean the Idle Air Control Valve on a 1998 Nissan Frontier
sounds like you have a short in the wiring to your fuel pump! clean all contacts and check for proper grounds...
Not unless you are having problems. If you want to make sure the injectors are clean just add a can of Seafoam Engine Treatment or Techron Fuel System Cleaner to a full tank of fuel. Both are excellent products.
You can get a kit that has the boot that is open and has new greese that has screws and nuts to put it together. All you do is clean out the old shaft bearing and install the greese and then install the boot. Also Mighty has a kit that if you have the axle removed, you clean out the bearing and install the greese and stretch the boot over the carrior. This works better but takes more time.
It is a fuel system cleaner that also claims to clean the catalytic converter and restores overall engine performance.
drain all coolant from system. flush with water until clean water is comming out of engine. fill rad with water and run engine up to temp. this should help remove the antifreeze from the engine. drain water out and run water through system again until clean. add new coolant to system. should be good. use garden hose to flush out system
There is a product called Seafoam that can clean out the fuel system. If you don't want to do that you can take it to a shop and have them do it.
Replace the fuel filter. There is no way to open it and clean it.
A motor flush is designed to help clean any sludge from the engine. A cleaner system will make fluids flow easier, and make the engine last longer.
Can saline clean out your system from drugs