turn it push.
Find the PCV valve towards the rear of the engine, and remove the PCV valve. Remove the rubber vacuum line, and discard the old Valve. Connect the vacuum line to the new valve and put the valve in its place.?æ
the hose that is connect to your engine.
Pull upward on the hose that the PCV valve is in. The PCV valve will pull out of the hose. The PCV valve is located in the valve cover.
Disconnect the PCV valve tube from the PCV valve.Disconnect the PCV valve electrical connector if it has one.Turn the PCV valve counterclockwise to remove from the valve cover.To install, reverse the removal procedure.
Remove the PCV valve retaining screws. Remove the PCV valve hose. Reverse the process to install the new PCV valve.
The pcv valve is the small hose connect to the intake between the air filter and the throttle body. Its pretty easy to find as it is the only other part attached to the intake hose.
The PCV valve has a check ball in it, That's what you are hearing. REPLACE PCV VALVE
It connects to the crankcase vent, the air filter and the valve cover.
The pcv valve is on the passenger side valve cover
The PCV valve is located in the valve cover
The PCV valve on q 2007 Torrent is made into the valve cover. It is not removable, the valve cover and PCV valve must be replaced together.
PCV valve (A)