0
Really need more info.lighting fixture on ceiling fan.ect.......
Wiki User
∙ 13y ago
Wiki User
∙ 14y agomains plug
Add your answer:
Earn +20 pts
Why you use mercury lamp instead of ordinary light or sodium lamp in constant deviation?
we use mercury lamp instead of ordinary lamp because ordinary lamp has many wavelengths when mercury lamp has single wavelength so in constant deviation we use only mercury lamp.
Can you use an incandescent light bulb in a full spectrum lamp?
no
How much power does a 250 watt hps light use an hour?
compare to different lamps mv lamp,hpsv lamps & cfl lamp these are how mush energy comsumed for 225w lamp
Can you use a led lamp in a 100w sodium fixture?
Probably not. Sodium light fixtures generally have a "ballast".
Can you use a higher watt halogen bulb safely in a floor lamp i.e .a 300w for a 230w in a floor lamp?
Halogen bulbs generate a lot of heat and for that reason the power (watts) is limited, to prevent a fire hazard. Each light fitting should be marked with a power limit which should be observed. Without additional information a 300 w bulb should not be put in a fiiting that previously had a 230 w bulb.
What do you use to make a light or lamp fitting light up?
mains plug
What do you use to make lamp or light fitting light up?
mains plug
What do you use to make a lamp or a fitting light up?
mains plug
What do you use to make a amp or light fitting light up?
A lamp or light fitting will light up if connected to either Alternating Current (AC), or Direct Current (DC). AC is from the mains, and DC is from a battery. So it depends on the construction and components used to construct the lamp as to which electrical source you use.
Which one is correct by the light of the lamp or in the light of the lamp?
Both are acceptable with different meaning. I read by the light of the lamp means I use the lamp to light the pages so that I can read them. I saw it in the light of the lamp means it was visible in that pool of light caused by the lamp.
What is the use of lamp?
the uses of lamp is to light us.....
How could you soften the light in your bedroom?
Use pink light bulbs they will make you look prettier. Use blue light bulbs to make soft light. If you have a lamp, drape a scarf over it to dim the light. Install a dimmer switch to adjust the lighting.
How do you make a straw?
The first step in making a straw parol is to use wire to make the skeleton of the lamp. Make different sized circles out of wire and string them together with the largest one in the center. Then cover the outside of the lamp with tissue paper or straw if available. Use glue to fasten strips to wire. A battery operated tea light can then be glued inside the top of the lamp for light.
Is it safe to use a 3-way incandescent light bulb in my table lamp that states it takes a 60 watt bulb?
Provided the bulb is rated at 60 Watts or less and the fitting is compatible, yes.
How do you make a straw parol?
The first step in making a straw parol is to use wire to make the skeleton of the lamp. Make different sized circles out of wire and string them together with the largest one in the center. Then cover the outside of the lamp with tissue paper or straw if available. Use glue to fasten strips to wire. A battery operated tea light can then be glued inside the top of the lamp for light.
What is the difference between a regular lamp and a children's lamp?
A children's night light or lamp is ment for use at night. Giving off just enough light to allow a child to enjoy the safely of the light and not fear the dark. While a normal lamp is ment for general use during the day, to light up a room.
Why you use mercury lamp instead of ordinary light or sodium lamp in constant deviation?
we use mercury lamp instead of ordinary lamp because ordinary lamp has many wavelengths when mercury lamp has single wavelength so in constant deviation we use only mercury lamp.
