Probably not. Sodium light fixtures generally have a "ballast".
Taking a lamp out of any light fixture will save energy, though it might be hard to see things in the dark. The lamp will not be damaged without lamp being in the fixture.
No, the fixtures do not have anything is common other that emitting light. If you are talking about removing the fluorescent fixture and installing a new fixture that can take a LED lamp then the answer is yes.
If the exit fixture uses a LED lamp it will have a 1 to 3 watt rating. If it is a incandescent bulb, each lamp will draw about 25 watts each.
Probably around 100W
There is no direct cross over replacement for the halogen bulb. The pin configurations are different. The halogen bulb has pins whereas the LED lamp is an intermediate screw in base. The LED bulb uses an intermediate base so that it can be screwed into a regular household fixture as a direct replacement for the old incandescent type bulb.
Taking a lamp out of any light fixture will save energy, though it might be hard to see things in the dark. The lamp will not be damaged without lamp being in the fixture.
No, the fixtures do not have anything is common other that emitting light. If you are talking about removing the fluorescent fixture and installing a new fixture that can take a LED lamp then the answer is yes.
If the exit fixture uses a LED lamp it will have a 1 to 3 watt rating. If it is a incandescent bulb, each lamp will draw about 25 watts each.
A table lamp with a fluorescent or LED bulb provides excellent energy efficient lighting. Almost any lamp can accommodate a compact fluorescent or LED bulb which makes any fixture more efficient.
Ecoshift Corp LED Philippines Warehouse Lighting Fixture
Probably around 100W
similarity between lamp and LED- lamp in simple current is used to show that current is flowing and LED performs the same task but in electronic circuit .difference between lamp and LED-lamp in simple current is used to show that current is flowing and LED performs the same task more efficiently but in electronic circuit . so LED works more efficiently in electronic circuit than lamp which performs task in simple circuit.
Consider an LED desk lamp to get all of the benefits of a traditional desk lamp with a low power bulb that will take many years to burn out. LED lamps are a great value.
I cannot tell you as this will vary from brand to brand of LED lightbulbs. Look on the package for the "equivalent wattage" rating and buy bulbs rated at 60W equivalent. You should not need to change the fixture, just put LED lightbulbs in the one you already have.
You could but it would be extremely bright! An incandescent lamp of 60 watt is about 800 lumens And so a 10 watt LED lamp should be plenty big enough. If you want as much light as possible instead of energy saving then you can fit bigger wattage LED lamps. Also, because they run a lot cooler, you can often exceed the maximum (Incandescent) rating for the fitting.
There is no direct cross over replacement for the halogen bulb. The pin configurations are different. The halogen bulb has pins whereas the LED lamp is an intermediate screw in base. The LED bulb uses an intermediate base so that it can be screwed into a regular household fixture as a direct replacement for the old incandescent type bulb.
An LED lamp from the Toshiba brand typically varies in price depending on where it is purchased from. Overall, the cost of a new lamp from larger sites like Amazon and eBay is about $24.50 on average currently.