You could but it would be extremely bright! An incandescent lamp of 60 watt is about 800 lumens And so a 10 watt LED lamp should be plenty big enough. If you want as much light as possible instead of energy saving then you can fit bigger wattage LED lamps. Also, because they run a lot cooler, you can often exceed the maximum (Incandescent) rating for the fitting.
Yes, that should not be a problem. The wattage maximum on the light fixture refers to the actual power used by the bulb, which is probably about 20 watts for a "100 W equivalent" LED bulb. The packaging for the LED bulb should state the actual power used.
A 60 watt LED will put out an increadable amount of light for an outside post fixture. You may want to cut the wattage back to 6 watts for a more refined light output. To answer the question as it is , yes it can be done.
You may use an incandescent (lightbulb in a lamp) or a infrared
A compact fluorescent lamp (CFL), also called compact fluorescent light, energy-saving light, and compact fluorescent tube, is a fluorescent lamp designed to replace an incandescent lamp; some types fit into light fixtures formerly used for incandescent lamps. The lamps use a tube which is curved or folded to fit into the space of an incandescent bulb, and a compact electronic ballast in the base of the lamp.
The dark black incandescent type UV bulbs will work as they actually get hotter than the equivalent standard incandescent bulb of the same wattage, but the compact fluorescent type UV bulbs run too cool.
220 lumens is equal to a tungsten incandescent light bulb of 15 watts. Halogen lamp 20 watts. Fluorescent lamp 60 watts. LED lamp 60 watts. high pressure sodium vapour lamp 117 watts. Mercury vapour lamp 50 watts or 17.32 candle power
There is no halogen microwave. There is a halogen microwave oven bulb. (The technical term for a "bulb" is a lamp.) Some microwave ovens use a halogen lamp to light up the oven cavity. Replacing them is similar to replacing a "regular" incandescent lamp, except that when halogen lamps are being replaced, it is critical not to touch the lamp with bare fingers. Leaving skin oils on a halogen lamp shortens the lamp life and can set up a dangerous situation where the lamp might overheat.
No, carbon dioxide is not emitted by an incandescent lamp.
The Incandescent Lamp
Incandescent lamp
the most economical is the incandescent bulb because the power of bulb is low only while the fluorescent lamp is low and additional the power of ballast from 10%-20% power consumed.but the fluorescent lamp is 5 times brightly the incandescent bulb.
no
He named his invention the Incandescent Lamp, But it's commonly referred to today as the Incandescent Light Bulb.
GENERAL LIGHTING SERVICE (LAMP) Used to refer to what is more commonly called an "incandescent bulb" GLS stands for General Lighting Service (lamp/bulb). They are the standard light bulbs you are probably used to seeing around your home.
incandescent lamp
An incandescent light bulb, incandescent lamp or incandescent light globe is an electric light which produces light with a wire filament heated to a high temperature by an electric current passing through it, until it glows.
because fluorescent lamp consume least voltage than incondescent bulb.
No, compact fluorescent bulbs run much cooler that an incandescent bulb. A CF bulb can be unscrewed when the lamp is on whereas an incandescent will give you a bad burn if this is tried.
In an incandescent lamp, it is called a filament. It is usually made out of Tungsten. The resistance in the filament causes it to heat up, and then glow. In a neon lamp it is plasma, which is an ionized gas. In a fluorescent bulb mercury vapor is ionized to produce UV radiation, that hits the phosphor coating on the outside of the bulb and that glows.