The line supply connects to the top terminals of the switch and the load connects to the bottom terminals of the switch.
Type your answer here... main switch is difine as the switch which opparate whole power throw the house.
The two way switches work in pairs. We find most of them in our houses where the light bulb can be operated by two switches each at the far end to the other. Each switch consists of three terminals two of which are connected. When one switch is open and the other is closed then the bulb glows and viceversa
go to the Help option in Matlab. It will not help at all.
You get a battery, switch, nail and copper wire. You connect one end of the battery to the switch and the other end to the nail that is wrapped with some copper wire. The end of the switch that isn't connected you connect to the electromagnet.
Light switch connection is usually straight forward. Find your incoming hot wires, black and white. With the switch in the off (down) position and the power disconnected , connect the black wire to the top screw of the switch. Find the load wires and connect the black to the bottom screw of the switch. Connect the two remaining white wires together with a wire nut and push them to the back of the switch box. Install the switch into the wall box, replace switch plate cover. Turn the breaker (power) back on. Flip the switch to the up position and the light should come on.
can you connect wireless modem to a switch which will to two routers
To connect a PC to a switch you should use a straight through UTP cable.
Connect a wire from each PC to an unused port on the switch.
You connect up to 5 devices with HDMI cables to the switch, and connect the switch output to your TV with another HDMI cable. You the selector switch or the remote to go between the devices.
A crossover cable.
The function of a switch is to break and connect the flow of electricity.
we use straight cable to connect between the router and switch as router and switch are different devices.
Is a crossover cable needed to connect Host computers to the switch? Why or why not?
Yes, you if you printer has network interface (NIC). u can connect them through routers or switch
Nothing; the switch works the same if you use all ports, or only a few.If you need to connect additional computers, you can either get a larger switch, or connect two switches between themselves.Nothing; the switch works the same if you use all ports, or only a few.If you need to connect additional computers, you can either get a larger switch, or connect two switches between themselves.Nothing; the switch works the same if you use all ports, or only a few.If you need to connect additional computers, you can either get a larger switch, or connect two switches between themselves.Nothing; the switch works the same if you use all ports, or only a few.If you need to connect additional computers, you can either get a larger switch, or connect two switches between themselves.
They can; that is the usual function of a switch.
That is a layer3 switch