0
Lun te wajao inu behnchod
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How many spark plugs does a 1998 Mercury Tracer have?
The 98 Tracer has four plugs
Does every shell on a 50 caliber machine gun have a tracer in it?
No. A typical belt is four ball rounds, one tracer round.
How important is TTL to network security what is TTL for and can a Hacker use it to harm you PC or network?
TTL stands for "Time To Live". This is a piece of data in a network packet that specifies how many routers the packet can pass through before the packet expires and is thrown away. Every router that the packet travels through subtracts one from the TTL counter. When it reaches zero, the packet expires. The router will drop the packet, and then send a message back to the computer that sent the packet telling it that the packet has expired. The purpose of the TTL counter is to make routing loops less dangerous. Let me explain.... Routers are devices that look at an incoming data packet and decide where to send it to get it one step closer to its destination. It's possible for one or more routers to be configured such that router A sends the packet to router B, which sends it to router C, which sends it to router A, which then starts it over again. Without the TTL counter, this packet (and any subsequent packet sent to the same destination) would circulate endlessly, taking up bandwidth until someone fixes the routing loop. However, with TTL, each router subtracts one from the TTL counter until eventually the counter hits zero and the packet goes away, giving someone time to fix the problem before the links are so congested with looping packets that it's no longer possible to talk to the router. TTL can affect network security in a couple of ways. Most operating systems set the TTL counter to 64 or 128, which is a pretty large number that will guarantee your packet can get across the Internet. To improve your network security, you can set your TTL counter to a low number. If your internal network is only four routers wide, you can set your TTL to 4. This will ensure that any packets generated on your network will not travel very far beyond your internal network. An attacker can also use the TTL feature to probe your network for the existence and address of your routers. This feature is used by the "traceroute" or "tracert" utility. It works by sending out a packet with a TTL of 1. The first router that the packet encounters will decrement the TTL to 0, drop the packet, then send a message to the traceroute program telling it that the packet expired. By looking at the source address of this packet, traceroute knows the address of the first router. Next traceroute sends a packet with a TTL of 2, which causes the packet to expire at the second router, which sends a message back to traceroute and exposing its address. And so on. Once an attacker knows the addresses of your routers, he or she can start working on compromising them, which can cause you no end of security problems. The solution is to prevent these packets from reaching your routers by using a firewall to block them. HTH, Gdunge
What devices are required to connect 4 PCs to a cable modem and provide a hardware firewall?
You need a router, four cables in the case of wired network or four wireless cards (laptops don't need it because they have it). Plus a hardware firewall which can cost couple hundred dollars. Usually firewalls inside of routers are pretty good (in good routers) and it's not easy at all to hack it.
When did Connect Four happen?
Connect Four happened in 1974.
Where is the carborator located on a 96 Mercury Tracer?
On a 1996 Mercury Tracer : Both the 1.8 and 1.9 liter four cylinder engines are ( fuel injected ) so there is ( no carburetor )
Where is the carburetor located on a 96 Mercury tracer?
On a 1996 Mercury Tracer : Both the 1.8 and the 1.9 liter four cylinder engines are fuel injected so there is no carburetor
Are there games like perfect world?
yes connect four yes connect four
Is there a 3D connect four game?
Yes, the game is called Connect Four 3D.
What are the release dates for Connect Four - 2009?
Connect Four - 2009 was released on: USA: 2009
How can you connect 4 routers to 6 switches?
A network can function fairly easily with just one router, the router is used to access the internet and in small home it is also the network switch that connects all the home computers together. It is not necessary to connect 4 routers together on the same network because each router will try to assign an ip-adress to each of the computers on the network resulting in many conflicts. If you did want to do this type of network (depending on your circumstances, i know of schools that use routers as small network switches for each room) then I suggest that you disable DHCP and all server attributes of the routers. Then you use a star network configuration for the 4 routers that are connected elsewhere, use long Ethernet cables to link the routers to a network switch each; from there have the 2 remaining network switches in the same room and have them in a redundancy layout. Connect the 4 router and switch pairs to the redundancy pair. This network is very inefficient and very costly but you have the capability to join a small office to a larger office four times over in the same network. It is not recommended that you do this.
In Connect Four are you allowed to connect more than four?
yes. If you have five in a row set up, and you manage to make it work, that wins the game, because there are four within it. ___________ You can set it up to connect as many as you want until you actually connect four or more. maxium you cn possible connect is 7
