usb
1) mixer to speakers: Numark main XLR-output to Behringer speaker XLR-input 2) sound from computer: computer line out to a free input on the Numark 3) sound to computer: use the USB cable connector on the Numark (might also work the other way around, not 100% sure)
Information on Numark DJ can be found from many different online resources. The most reliable resource is the official Numark website, which has detailed information about Numark DJ.
To connect speakers to a Numark Mixdeck, locate the main output jacks on the back of the unit. Use appropriate audio cables (typically XLR or 1/4" TRS) to connect these outputs to your powered speakers or an amplifier. Ensure the speakers are powered on and adjust the volume levels on both the Mixdeck and the speakers for optimal sound. Finally, test the setup by playing audio through the Mixdeck.
No you don't need an amp with the numark kxmo2.
Numark products are very rare and difficult to find. An individual who is looking to purchase a Numark DJ Mixer can buy one at Amazon, Best Buy, or the official place of Numark.
DJ NuMark's birth name is Mark Potsic.
To connect Virtual DJ with the Numark MixDeck, first, ensure that the MixDeck is properly connected to your computer via USB. Then, open Virtual DJ and navigate to the "Settings" menu. Under the "Audio" tab, select the MixDeck as your audio output device. Finally, you may need to choose the MixDeck in the "Controllers" tab to enable mapping for the hardware controls.
To record on the Numark IM9 mixer, connect the output from the mixer to a recording device using RCA cables. Adjust the recording levels on the mixer to ensure a proper signal is being sent to the recording device. Start the recording on the device and monitor the levels to avoid clipping.
Numark has the best DJing equipment in the business! If you are just starting off you should try the iDJ Live. If you want more informatoin on Numark you can go right to their website at www.Numark.com Hope this helps! :)
To connect Virtual DJ with the Numark Mixdeck Express, first ensure that the Mixdeck is powered on and connected to your computer via USB. Open Virtual DJ and go to the settings menu, then select the "Controllers" tab. From there, choose the Mixdeck Express from the list of detected controllers, and it should automatically map the controls. Finally, you can start mixing, ensuring that the audio output is set correctly in the audio settings of Virtual DJ.
A person could sell a Numark TTSUB off of many online retail places. Amazon is a popular place to sell one. Also Ebay would be another popular place to sell a Numark TTSUB.
There are a few places that one could find Numark DJ Equipment for their audio and studio sound production. One such place that a person could go to get a good deal is his or her local Guitarcenter. Another place that sells Numark DJ Equipment is PlanetDJ. These retailers will offer deals on Numark DJ Equipment.