0
How do you connect your Dish receiver to your TV without input jacks?
Wiki User
∙ 11y ago
Receivers can be connected to the TV via a Coaxial cable. This allows the TV to use Ch. 3-4, or Ch. 60 or 73 for TV2, to show a picture rather than the input.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Can you connect a receiver speaker jack using banana connectors to wireless headphones using audio cable with rca jacks?
No. The wireless transmitter is expecting a line level input. The banana plugs are power amplifier level, and you will damage your transmitter. If you add the model of your receiver/amplifier into the discussion tab above, we can tell you where to connect it.
How do you set up surround sound on a LG smart TV?
The direct answer to this would be, no. But I think you might be asking the wrong question. To get surround sound to play your television programs you would need to put your cable/satellite box through the receiver. As a side note: There are two ways to do this. 1. If you receiver supports video pass thru (which would mean that there are VIDEO IN jacks and VIDEO OUT jacks) If not then proceed to the next option. You will hook up everything from the cable/satellite box to the receiver and just one cable, which will be the video signal, to the television. 2. You will hook up only the audio cables to the receiver and a single video cable straight to the television.
How do you connect a standard definition TV to a high definition satellite receiver?
You can connect your standard definition TV to your satellite receiver in a couple of ways. First, if your TV has composite video/audio inputs (yellow, red, and white RCA jacks), you can connect to these inputs using the composite video outputs of the satellite receiver. Another alternative is to use the standard coaxial cable output from your satellite receiver to connect to the 75ohm antenna input on your TV. *Note: Neither of these connections will display high definition programming on your standard definition TV. The TV is only capable of standard definition, so you will see a clear picture, but it won't be true high definition, regardless of the input signal's definition.
How do you connect laptop to 5.1 stereo system?
Connect Laptop to Stereo with a Y cable from the headphone jack of the laptop to the red and white plugs on the back of the stereo system.· Purchase a 1/8 inch (3.5 mm) mini-jack to RCA cable. It looks like a "Y." This cable will allow you to use the single output jack on your laptop to connect to the left and right inputs on your stereo receiver.· Plug the single-end mini-jack into the headphone or speaker output jack on your laptop.· Plug the two RCA ends into your stereo receiver input jacks. Use an input such as "Aux." The cable should be color-coded (red and white) for easy matching with the right and left input jacks.· Change the receiver to the input mode that you used (i.e. "Aux").· Select files on your laptop and play. You're now ready to enjoy MP3s from your laptop on your stereo system.
Do you hook the surround sound to the TV or satellite?
check your surround sound if it has an HDMI or AV input jacks. if it has, then you are good to go. from your satellite receiver, attach the HDMI cable or AV cable. connect it to your surround sound. after connecting the satellite receiver box and surround sound, attach the HDMI or AV cable from the surround sound to your television.
How do you connect satellite to TV Tuner which has AV and HD jacks?
check first your satellite receiver if there is an HDMI jack. connect your HDMI cables from your satellite receiver to your tv tuner. if you don't have the HDMI jack, check the AV output jack. connect the AV cables from your satellite receiver to your tv tuner. you can use either AV or HDMI.
Do you need the high input piece for the amp to get it to work?
high input is for speaker level input and low input is rca jacks
How easy is it to connect a DVD/VCR to a tv?
Gather two sets of combination stereo audio and composite video cables. These bundled cables have a left and right audio cables as well as a composite video cable.,Turn off the DVD, VCR and television,Plug one bundled cable into the appropriate output jacks on the DVD player. Connect the other end of this cable to the appropriate input jacks on the TV. This lets you watch DVDs on the TV.,Plug the other bundled cable into the appropriate auxiliary output jacks on your DVD player. Connect the other end of this cable to the appropriate auxiliary input jacks on the VCR. This will allow you to send a signal to the VCR,Turn everything back on and make sure that you can watch DVDs and record from DVD to VCR.
Where is computer's sound card input?
There are jacks located on the back of the computer. Some newer computers will have the same jacks on the front.
Where do audio and video cables plug in?
The yellow cable is the video. It plugs into the yellow video input jack. The white and red, or black and red cables are left and right audio. The connect to the audio in or out jacks.
How do connect computer speakers to radio?
Connect them to the "headphone" or "line out" jacks on your radio. If your radio has no headphone or "line out" jacks, you've got a problem. Best to have someone handle the job who knows what he's doing.
Do you need connectors banana pin etc. in order to connect flat speaker cable to the speaker and receiver terminals?
Your speakers and receiver should have binding posts. You can unscrew the body back, thread the wire through the hole in the post, and tighten the body to secure it. Bananna jacks are very handy, but almost always not needed.
