How do you set up surround sound on a LG smart TV?

Answer 1

The direct answer to this would be, no. But I think you might be asking the wrong question. To get surround sound to play your television programs you would need to put your cable/satellite box through the receiver. As a side note: There are two ways to do this. 1. If you receiver supports video pass thru (which would mean that there are VIDEO IN jacks and VIDEO OUT jacks) If not then proceed to the next option. You will hook up everything from the cable/satellite box to the receiver and just one cable, which will be the video signal, to the television. 2. You will hook up only the audio cables to the receiver and a single video cable straight to the television.

Answer 2

Connect the digital audio out of the TV to the digital input of the surround sound system. If you are using a cable or satellite receiver for your programming, connect the audio output of them to the input of the surround system.

Answer 3

If you are using the TV's own tuner, connect the digital audio output of the TV to the digital input of the surround receiver. If you are using an external (cable or sattelite) tuner, connect an HDMI cable from the tuner to the receiver, and then connect the HDMI output from the receiver to the TV.

Answer 4

be more specific. i dont know what you have.

but generally... all speakers will plug into the receiver/amplifier.

all your sources (blu-ray player, cable box, ect...) will either go to

A.) directly to the receiver and you must connect the receiver to your tv. (all connections will be HDMI if the system is current.

B.) connect all devices to your tv and plug the surround sound to the tv's audio output jack... usually rca (red and white), or digital optical

Answer 5

For a successful surround sound installation, you will need to first figure out where the speakers will go. After that, you can run speaker wire and mount the speakers before testing your surround system to ensure it's working.

Answer 6

Yes. Connect the audio output (digital or analog) of the TV in to the TV input of the receiver.

Answer 7

Yes you can, if your DVD Home Theater system has a audio input. Connect the audio output from your tv or cable box to this input.

Answer 8

Connect the digital audio output of the TV to a surround sound receiver and speakers.