Clean it :) use a magnet cleaner or get some bright and clear chemicals to put in the water
Fog forms on bathroom mirrors and car windows when the water vapor in the air condenses on the glass. This is due to the temperature difference between the glass and the air.
It depends on the size of each water droplet and the density of the fog. It is unlikely that the water droplets in a seven block fog would be enough to fill a half-full glass, as fog droplets are typically very small.
What I do is put my headlights on ( low beam ) and pull the headlight control towards me to turn on the fog lights ( push the control in to turn off the fog lights )
how do you make glass in alxemy
In many applications, fog lights are made of glass for various reasons. The main reason is due to heat. Fog lights are typically high intensity and burn very bright, therefore they generate more heat Glass can tolerate a much higher temperature than plastic before showing signs of melting. The glass lense is usually pretty thick which is also to tolerate heat, shock, and depending on the placement of the fog lights, the thick glass lense can resist damage caused by road debris. The thick glass lense also allows for more complex grinding to help direct the light to make the fog light more effective in low visibility conditions, grinding also can help focus the light on the road allowing flexibility in placement of the fog lights on the vehicle.
pull the headlamp control towards you to turn your fog lamps on
The fog light control is in the center stack of the dash , just to the right of the radio Turn your park lamps or low beam headlights on and push the foglight control button to turn on the fog lights , push it again to turn off the fog lights
Fog control systems are designed to manage and reduce fog or mist that can impact visibility, safety, and operational efficiency in commercial and industrial environments. They are commonly used to control fog in areas such as warehouses, factories, and large-scale outdoor spaces to ensure a safer and more productive work environment. fogcontrolsolution/commercial-industrial/
On the floor that has Fog you are still able to see your character you CANNOT get rid of the fog. Just make your way for the stairs and eventually you will reach the special Marowak Ghost.
To switch on the fog lights on a Vauxhall Corsa, first ensure that your headlights are turned on. Then, locate the fog light control, usually found on the headlight stalk or a separate switch on the dashboard. Turn the control to the fog light symbol, and the fog lights should activate. Remember to turn them off when they are no longer needed to avoid dazzling other drivers.
moisture from your breathing for example condensing on the cold glass
PULL the light switch out (must be in lowbeam setting for fog lights to work)